Lighting System

Submitted by xjcdadmin on Mon, 06/14/2010 - 20:31
Model(s)

LIGHTING SYSTEM

3 Main switch
25   Flasher light (Front, Right)
26   Flasher light (Rear, Right)
27  "TURN" indicator light (Right)
28   "TURN" indicator light (Left)
29   Flasher light (Rear, Left)
30   Flasher light (Front, Left)
37 Tail/Brake light
39 Fuse "HEAD" (15A)
40 Meter light
41 Head light
42 "HIGH BEAM" indicator light
43 "LIGHTS" (Dimmer) switch
44
"START" switch
48 Battery
49 Fuse "MAIN" (30A) 

TESTS AND CHECKS Headlight Troubleshooting

 

HEADLIGHT DOES NOT COME ON WHEN ENGINE IS RUNNING/HIGH BEAM DOES NOT OPERATION.

 

 

Check headlight.

Faulty

 

Replace.

 

Check head fuse.

Faulty 

 

Replace.

 

Measure voltage on brown wire from main switch ("ON" position).

Faulty 

 

Check dimmer switch, replace if necessary.

 

Measure voltage on blue/black wire from starter switch ("ON" position).

No voltage 

 

Check main switch, replace if necessary.

 

No voltage 

 

Check starter switch, if necessary.

 

Measure voltage at dimmer switch terminal.

An open or poor connection between headlight and dimmer switch terminal.

Measure voltage at headlight high beam or low beam terminal.

No voltage 

 

 

Poor ground or poor connection of headlight wiring.

 

Taillight Troubleshooting

TAILLIGHT DOES NOT COME ON WHEN ENGINE IS RUNNING.

 

 

 

Check taillight bulb.

Faulty

Replace.

▼ OK

 

 

Measure voltage on blue wire from main switch ("ON" position).

No voltage

Check main switch, replace if necessary.

▼ 12v

 

 

Measure voltage at taillight terminal.

No voltage.

An open or poor connection between taillight and main switch terminal.

12v

Poor ground or poor connection or taillight wiring.