Headlight and Taillight

Headlight

1. Headlight bulb replacement

a. Remove the cowling assembly.

b. Remove the 2 screws holding the light unit assembly to the headlight body.

c.   Disconnect the lead wires and remove the light unit assembly.

d.   Remove the top and bottom fitting screws and the horizontal adjusting screw. Remove the light unit assembly from the headlight rim.

e. Remove the sealed beam unit holding screws. Remove the unit retaining ring and the defective unit.

f.    Slip a new sealed beam unit into position and secure it with the retaining ring and install it into the headlight rim.

g.   Reinstall the light unit assembly to the headlight body. Adjust the hedalight beam.

h. Reinstall the cowling assembly.

2. Headlight beam adjustment

a. Horizontal the beam to the right, turn the adjusting screw clockwise. To adjust the beam to the left, turn the screw counterclockwise.

b. Vertical adjustment:

Loosen the adjusting screw under the headlight body. Adjust vertically by moving the headlight body. When proper adjustment is determined, retighten the adjusting screw.

a.  Horizontal adjusting screw

b.  Vertical adjusting screw

Taillight

1. Taillight bulb replacement

a.   Open the seat.

b.   Pull open the lid in the seat cowl.

c.   To remove the bulb, turn it approxi matety 30° counterclockwise.

1.Lid 2. Bulb

d. To install the bulb, reverse the removal procedure.