INSPECTION
1. Inspect the starter plunger 1 for damage. Replace if damaged or worn.
• Vacuum piston 2. Replace if scratched/worn.
•Throttle valve diaphragm 3. Replace if torn or damaged.
REMOVAL
1. Remove carburetor assembly. Refer to engine removal section.
NOTE: The following parts can be cleaned and inspected without disassembly.
• Piston valve
• Jet needle
2. Disconnect:
CARBURETION
CARBURETOR
COOLANT DRAINING
Do not remove the radiator cap when the engine and radiator are hot.
1. Remove:
•Cap retainer 1
Radiator cap 2
2. Place an open container under the engine.
REMOVAL
1. Drain coolant
2. Remove radiator assembly
Refer to CHAPTER 3 "ENGINE REMOVAL".
INSPECTION
REMOVAL AND DISASSEMBLY
1. Drain coolant
2. Remove horns 1
3. Disconnect electrical leads 2
REMOVAL AND DISASSEMBLY
NOTE:
Be sure to drain the coolant before disassembly of the cooling system components.
1. Drain the engine oil
COOLANT FLOW
