Cable Routing

Submitted by xjcdadmin on Tue, 06/25/2013 - 14:58


*1: Pass front brake switch lead and right handlebar switch lead behind air hose.
*2: Pass brake hose and throttle cable between air hose and meter stay.
*3: Pass clutch cable, clutch switch lead, left handlebar switch lead and starter cable behind air hose.

*4: Pass speedometer cable outside meter stay, in front of fairing fitting stay, and outside brake hose.
*5: Pass horn leads in front of brake joint.
*6: Pass front flasher light leads between horn and brake joint.
*7: Pass wire harness between under bracket and wire harness stay.

*1: Fasten ground lead together left ignition coil.
*2: Pass clutch cable between air cleaner joint #3 and #4