Pick-up coil, Generator and Starter

Pick-up coil assembly

1. Remove the alien bolt that holds the timing plate.

2. Remove the pick-up coil securing screws and remove the pick-up coil assembly.

Generator and starter motor

1. Remove the generator cover and stator coil assembly.

2. Install the rotor holding tool (special tool) on the rotor as shown and remove the rotor holding bolt.

1. Rotor holding tool

3. Install the holding tool as shown and insert the rotor puller adapter (special tool) into the rotor shaft and screw in the rotor puller (special tool). Remove the rotor.

4. Remove the starter motor securing bolts and remove the motor assembly,