Lighting System

Submitted by xjcdadmin on Fri, 06/18/2010 - 01:45

LIGHTING SYSTEM

B. Lighting tests and checks The battery provides power for operation of the headlight, taillight, and meter lights. If none of the above operates, always check battery voltage before proceeding further. Low battery voltage indicates either a faulty battery, low battery water, or a defective charging system. See page 6-5 "CHARGING SYSTEM" for checks of battery and charging system. Also check fuse condition. Replace any "open" fuses. There are individual fuses for various circuits (see complete Circuit Diagram).

 

NOTE:
Check the headlight bulb first before performing the following check.

1. Headlight check

 

NOTE:
When the engine is started, the headlight and meter lights come on automatically and the lights stay on until the main switch is turned to "OFF" even if the engine stalls.

HEADLIGHT DOES NOT COME ON WHEN ENGINE IS RUNNING

 

 

Check for voltage on

"W" wire to headlight relay

Check AC generator, diode, or wiring circuit

 

Check for battery voltage (12V) on "R/Y" wire to headlight relay

Check fuse "Head" or wiring circuit

 

Check for battery voltage (12V) on "L/B" wire from headlight relay

Replace headlight relay

2. Taillight does not work:

a.   Check bulb.

b.     Check for 12V on blue wire.

c.   Check for ground on black wire to tail/ brake light.

HIGH BEAM AND/OR LOW BEAM DO NOT LIGHT

 

No voltage

Dimmer switch defective

Check for battery voltage at dimmer switch terminal

 

Check for battery voltage at headlight high beam or low beam terminal

No voltage

Open or poor connection between headlight and dimmer switch terminal

2. Taillight does not work:

a.   Check bulb.

b.     Check for 12V on blue wire.

c.   Check for ground on black wire to tai brake light.

Poor ground or poor connection of headlight

wiring