Electrical

Battery

1. Checking

If the battery shows the following defects, it should be replaced.

a.    The battery voltage will not rise to a specific value or no gassing occurs in any cell even after many hours of charging.

b.    Sulfation of one or more cells is indicated by the plates turning white or an accumulation of material in the bottom of the cell.

Fuel sender unit

1. Inspection

a.    Remove the sender unit from the fuel tank.

b.    Use a pocket tester (with ohm x 10 scale) for this check. Connect the pocket tester leads across the green lead and the black lead of the sender unit. The meter should show the following resistance at the specified fuel level. If not replace the sender unit.

SIGNAL SYSTEM Circuit diagram

Signal system tests and checks

Circuit diagram

Lighting system tests and checks

Circuit diagram

Description

Circuit diagram

A. C. Generator

1. Checking method

a.    Connect D. C. voltmeter to the battery terminals.

b.    Start the engine.

Circuit diagram

Starter motor

1.      Removal

See Engine Dissassembly, Starter and Generator.

XJ900RK CIRCUIT DIAGRAM Models Without Side Stand Switch

ELECTRICAL COMPONENTS