550H (Maxim)

Rear Wheel

Submitted by xjcdadmin on Fri, 06/18/2010 - 01:45

A. Removal

1.    Place the motorcycle on the center stand.

2.    Remove the tension bar and the brake rod from the brake shoe plate. The tension bar can be removed by removing the cotter pin and nut from the tension bar bolt. The brake rod can be removed by removing the adjuster.

Maintenance Specifications

Submitted by xjcdadmin on Fri, 06/18/2010 - 01:45

1. Engine

Engine oil capacity:
Total amount
Oil and filter change
Oil change

Recommended lubricant:
If temperature does not go below  4°C (40°F)
If temperature does not go above 15C (60°F)

2,900 cc (3.1 US. qt)
2,500 cc (2.6 US. qt)
2,200 cc (2.3 US. qt)

Chapter 1 General Information

Submitted by xjcdadmin on Fri, 06/18/2010 - 01:45

MOTORCYCLE IDENTIFICATION

A.   Frame serial number

The frame serial number is stamped into the right side of the steering head pipe.

B.    Engine serial number

The engine serial number is stamped into the elevated part of the right section of the engine.

Subscribe to 550H (Maxim)