CHARGING SYSTEM
A. Circuit Diagram
Above circuit diagram shows charging circuit in wiring diagram.
B. A.C. Generator
1. Checking method.
a. Connect D.C. voltmeter to the battery terminals.
ELECTRIC STARTING SYSTEM
A. Circuit Diagram
Above circuit diagram shows starter circuit in wiring diagram.
B. Starter Motor
1. Removal (see CHAPTER 3. "ENGINE DISASSEMBLY")
2. Inspection and repair
XJ650G WIRING DIAGRAM
CHAPTER 4. CARBURETION
CARBURETOR
A. Section View
B. Specifications
|
Main jet |
#110 |
ELECTRICAL
A. Battery
1. The fluid level should be between the upper and lower level marks. Use only distilled water if refilling is necessary.
CAUTION:
Normal tap water contains minerals which are harmful to a battery; therefore, refill only with distilled water.
CHASSIS
A. Fuel Petcock
If the fuel petcock is leaking or excessively contaminated, it should be removed from the fuel tank and inspected.
1. Remove the fuel tank and position it so that fuel will not spill when the petcock is removed.
ENGINE
A. Valve Clearance Adjustment
NOTE:
Valve clearance must be measured with the engine and at room temperature.
1. Remove the seat and fuel tank.
2. Remove the horn, flasher relay, and spark plug lead wires.
CHAPTER 2. PERIODIC INSPECTIONS AND ADJUSTMENTS
INTRODUCTION
YAMAHA
XJ650G and XJ650H (Maxim)
Note:
A separate manual covers the European and Austrailian versions of this model.
NOTICE
TABLE OF CONTENTS:
