CMS Components

Submitted by xjcdadmin on Wed, 06/10/2009 - 01:12

Sender locations

 

XJ650


System Components

Sidestand switch

Brake fluid level sender

Engine oil level sender

Battery fluid level sender

Headlight bulb

Tail/Brake light bulb

Fuel level sender

Computerized monitor

LCD panel

Computer unit

"Check" switch

"Warning" switch

Symbol Identification

Conductor

Bulb (single filament)

Crossing conductor (not joined)

Bulb (Double filament)

Conductors joined

Wire connector

Ground (earth)

Diode

Resistor (adjustable)

Sender

Switch

Power input

Switch

 

Power output

Fuse

Battery

Color Code

Br

Brown

Gy

Gray

B

Black

G/R

Green/ Red

L

Blue

G/L

Green/ Blue

W

White

G/Y

Green/Yellow

Y

Yellow

L/W

Blue/ White

G

Green

Y/W

Yellow/ White

Y/G

Yellow/ Green

B/R

Black/ Red

W/R

White/Red

G/W

Green/ White

W/B

White/ Black

W/L

White/Blue

R/B

Red/Black

Y/B

Yellow/Black

NOTES ON TROUBLESHOOTING

Before checking the computerized monitor, check the following points:

Battery: Be sure to use a fully-charged battery for troubleshooting.

Motorcycle: The motorcycle to be inspected must be of standard specification (not modified after shipped from the factory).

1.   No optional parts for users are fitted to the motorcycle. (Decoration light, etc.)

2.   No modification is made to any part of the motorcycle. (Change in electrical circuits, etc.)

3.  The level displayed on each monitor is correct, (the fuel, engine oil, brake fluid, and battery fluid levels are correct.)

4.  All light bulbs are in good condition.

Tester: Use a Yamaha Pocket tester for checking of electrical parts.