Electrical Specifications
Electrical SpecificationsModel(s)
| Voltage | 12V |
| Ignition system: | |
| Ignition timing (B.T.D.C.) | 7°/1,050r/min |
| Advanced timing (B.T.D.C) | 37.576,000 r/min |
| Advancer type | I Electrical type |
|
T.C.I.: |
|
| Pick up coil resistance (Color) | 120O ± 20% at 20°C (68°F) (0 - B, Gy - B) |
| T.C.I. unit-model/Manufacturer | TID14-21/HITACHI |
|
Ignition coil: |
|
| Model/Manufacturer | CM12-20/HITACHI |
| Minimum spark gap | 6 mm (0.24 in) or more at 500 r/min |
| (19 kV/ 100 r/min at 6V, 16 kV/9,500 r/min at 14V) | |
| Primary winding resistance | 2.7P. ±10%at20°C(68°F) |
| Secondary winding resistance | 13.2 kfi ± 20% at 20°C (68°F) |
|
Spark plug cap |
|
| Type | Resin type |
| Resistance | 5.5KO |
|
Charging system: |
|
| Type | A.C. generator |
| Model/Manufactu rer | LD119-08/HITACHI |
| Output | 14V 19A at 5,000 r/min |
| Field (inner! coil resistance (Color) | 4.00 + 10% at 20°C (68°F) (G - Br) |
| Armature (Outer) coil resistance (Color) | 0.46O ± 10% at 20° C (68° F) (W - W) |
| Brush - Overall length | 17 mm (0.67 in) |
| — Wear limit | 10 mm (0.39 in) |
| — Spring pressure | 190~360g(6.7~ 12.7 oz) |
|
Voltage regulator: |
|
| Type | Field control type |
| Model/Manufacturer | SH233-12/SHINDENGEN |
| No load regulated voltage | 14.2 ~ 14.8V |
|
Rectifier: |
|
| Model/Manufacturer | SH233-12/SHINDENGEN |
| Capacity | 35A |
| Withstand voltage | 320V |
|
Battery: |
|
| Capacity | 12V 14AH |
| Specific gravity | 1,280 |
| Electric starter system: | Constant mesh type |
| Starter motor - Model/Manufacturer | ADB4D2/NIPPONDENSO |
| - Output | 0.6 kW |
| Armature coil resistance | 0.014O ± 6% at 20°C (68°F) |
| Brush-overall length | 12 mm (0.47 in) |
| Limit | < 8.5 mm (0.33 in) > |
| Spring pressure | 800+ 150 g (28.22 ± 5.29 oz) |
| Commutator dia. | 28 mm (1.1 in) |
| Wear limit | <27mm (1.06 in) > |
| Mica undercut | 0.6 ± 0.2 mm (0.024 + 0.008 in) |
| Starter switch manufacturer | HONDA LOCK |
| Amperage rating | 150A |
| Coil winding resistance | 3.412 at 20°C (68°F) |
|
Horn: |
|
| Type/Quantity | Plane type/2 |
| M odel /Ma nuf actu rer | CF-12/NIKKO |
| Maximum-amperage | 2.5A |
|
Flasher relay: For Germamy |
|
| Type | Condenser type Tramsistor type |
| Model/Manufacturer | FU249CD/NIPPONDENSO FJ245ED/NIPPONDENSO |
| Self cancelling device | YES NO |
| Flasher frequency | 85 ± 10 cycle/min <— |
| Wattage | 21Wx2+3.4W «- |
|
Self-cancelling unit |
|
| Model/Manufacturer | 1A0/MATSUSHITA |
|
Oil level switch: |
|
| Manufacturer | IMIPPONDENSO |
|
Fuel gauge: |
|
| Manufacturer | NIPPON SEIKI |
| Sender unit resistance — Full | 7O±70%at20°C(68°F) |
| — Empty | 95O±80%at20°C(68°F) |
|
Starting circuit cut off relay: |
|
| Model/Manufacturer | 12R/OMRON |
| Coil winding resistance | 75ft ± 10%at20°C(68°F) |
|
Circuit breaker: |
|
| Type | Fuse |
|
Amperage for individual circuit: |
|
| Main | 30A/1 |
| Headlight | 20A/1 |
| Signal | 10 A/1 |
| Ignition | 10 A/1 |
| Reserve | 30A/1 and 20A/1 |