700XSC (MaximX)

SHIFTER AND MIDDLE GEAR

1. Remove:
• Crankcase cover (Left) 1
• Gasket
• Dowel pin 2
• Shift shaft 3
• Shift lever 4
• Oil level maintaining plug 5

2. Remove:

PISTON AND CAM CHAIN GUIDE

Mark each piston so it can be reinstalled in the appropriate cylinder. 
1. Remove: 
• Piston pin clips 1
• Piston pins 2

RADIATOR PIPES, CARBURETOR JOINT, AND OIL DELIVERY PIPE

1.  Remove:
• Radiator pipe 1
• Cover (Right) 2

2.  Drain the coolant (in the cylinder) by removing drain bolts 3  

PREPARATION FOR REMOVAL

1. Remove all dirt, mud, dust, and foreign material before removal and disassembly.

2. Use proper tools and cleaning equipment. Refer to CHAPTER 1, "SPECIAL TOOLS."

NOTE: It is not necessary to remove the engine in order to remove the following components: 
• Piston
• Clutch
• Carburetor
• Oil pump
• Water pump

HEADLIGHT

Headlight Bulb Replacement

1.  Remove securing screws (1) from light unit assembly/headlight body.

2.  Disconnect the headlight lens unit leads

3. Remove the light unit assembly

1.  Disconnect:

• Negative lead (1)

• Positive lead (2)

• Breather hose (§)

2.  Remove the battery

3. Check the fluid level. It should be between upper (1) and lower (2) level marks.