Maintenance Specifications -- Engine 700X
Model |
XJ700XN/XNC |
|
Cylinder Head: Warp Limit |
0.03 mm (0.0012 in) |
- Read more about Maintenance Specifications -- Engine 700X
- Log in to post comments
Model |
XJ700XN/XNC |
|
Cylinder Head: Warp Limit |
0.03 mm (0.0012 in) |
PREPARATION FOR REMOVAL
1. Remove all dirt, mud, dust, and foreign material before removal and disassembly.
2. Use proper tools and cleaning equipment. Refer to CHAPTER 1, "SPECIAL TOOLS."
REMOVAL AND DISASSEMBLY
NOTE:
Be sure to drain the coolant before disassembly of the cooling system components.
1. Drain the engine oil
SWINGARM AND REAR SHOCK ABSORBER
1 Rear shock absorber
2 Swingarm
3 Bearing
4 Oil seal
5 Collar
6 Lock washer
7 Left pivot shaft
8 Pivot cover
9 Right pivot shaft
10 Nut
11 Rubber boot
12 Spring band
1. Refer to engine removal. Reverse those removal steps that apply.
2. Tighten engine mounting bolts
Engine Mounting Bolt: Front 1: 42 Nm (4.2 m-kg, 30 ft-lb)
Rear 2 : 90 Nm (9.0 m-kg, 65 ft-lb)
Down Tube 3 , Bracket 4 : 33 Nm (3.3 m-kg, 24 ft-lb)
Item |
Remarks |
SIGNAL SYSTEM
Electrical
Voltage: 12V |
Ignition System: |
REMOVAL
1. Drain coolant
2. Remove radiator assembly
Refer to CHAPTER 3 "ENGINE REMOVAL".
INSPECTION