Ignition Timing Check

IGNITION TIMING CHECK

Flywheel is marked as follows:

(1) Pickup coil mark

(2) TDC for No. 1 cylinder

(3) Firing range for the No. 1 cylinder

1. Check:

• Ignition timing

Ignition timing check steps:

•  Remove the cover.

•  Connect the Timing Light (YU-08037) (1) to No. 1 cylinder spark plug lead.

•  Warm up the engine and let it idle at the specified idle speed of 1.050 ± 50 r/min.

•  Visually check the upper pickup coil mark (T) is within the firing range (2) indicated on timing plate.

Incorrect firing — Check timing plate and/or pickup assembly (tightness damage)

Refer to CHARTER 6. "ELECTRICAL" for further information.

(1) Pickup coil mark.

(2) Firing range for the No. 1 cylinder